SPE Disks and Cartridges
Waters Corp Waters Oasis MCX Vac Cartridge, 1 cc, 30 mg Sorbent, 60 μm
These 1 cc cartridges feature a novel, mixed-mode polymeric sorbent, optimized for high selectivity and sensitivity in extracting basic compounds. The water-wettable sorbent ensures high retention and excellent recoveries even if it runs dry, removing the need to prevent sorbent bed dry-out. Designed as syringe-barrel-type cartridges, they are suitable for vacuum manifolds and automated SPE instruments.
- Mixed-mode polymeric sorbent, cation-exchange groups
- High selectivity and sensitivity for basic compounds
- Water-wettable, maintains retention and recovery even if dried
- Eliminates need for sorbent dry-out prevention
- 60 μm particle size for viscous samples
- Dual retention modes: ion exchange and reversed-phase
- Stable across wide operating pH range (0 to 14)
- Maximizes SPE recovery; provides clean extracts
Waters Corp Waters SPE Cartridge, 1 cc, 30 mg, 30 μm, Flangeless
Oasis MAX solid phase extraction products are mixed-mode anion eXchange sorbents designed for acids. Built upon the unique water-wettable Oasis HLB Copolymer, these products offer both reversed-phase and ion exchange retention modes for enhanced cleanup selectivity and sensitivity, providing clean samples with high sensitivity and reduced matrix effects for LC-MS/MS analyses.
- Limits the impact of matrix interferences on sensitivity and increases the robustness and reproducibility of analytical results
- Combines reversed-phase and ion exchange retention for greater cleanup selectivity and sensitivity for acidic compounds
- Ensures high batch-to-batch and lot-to-lot reproducibility for robust, accurate, and precise analytical methods
- Available in a 1 cc flangeless cartridge format with 30 mg sorbent and 30 μm particle size
Waters Corp Oasis WAX 3 cc Vac Cartridge, 60 mg Sorbent per Cartridge, 60 µm, 100/pk
The 3 cc Oasis WAX cartridges contain the Oasis WAX sorbent, which is a polymeric reversed-phase, weak anion exchange mixed-mode sorbent that has been optimized for fast, simple, and highly selective sample preparation of strong acidic compounds. Since the Oasis WAX sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. The 60 µm particle size is recommended when working with viscous samples. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.
Waters Corporation Solid Phase Extraction Vac Cartridge, Oasis MCX, 3 cc, 60 mg, 60 μm
Oasis MCX 3 cc Vac Cartridge features a novel, mixed-mode polymeric sorbent for high selectivity and sensitivity in basic compound extraction. It is water wettable, ensuring consistent recoveries even if it runs dry. Designed for viscous samples (60 μm particle size), it is compatible with vacuum manifolds and automated SPE. Offers pH stability from 0 to 14 and higher binding capacity than silica-based sorbents, facilitating method development.
- Optimized for high selectivity & sensitivity in basic compound extraction, water wettable for consistent retention & recovery when dry.
- 60 μm particle size suitable for viscous samples; compatible with vacuum manifolds & automated SPE.
- Novel mixed-mode polymeric sorbent provides pH stability from 0 to 14 & greater binding capacity than silica-based SPE, preventing breakthrough/recovery loss.
Waters Corp Oasis MAX Vac Cartridge, 3 cc, 60 mg, 60 μm
The Oasis MAX 3 cc Vac Cartridge features a novel, mixed-mode polymeric sorbent, ideal for extracting acidic compounds with high selectivity and sensitivity. Its water-wettable sorbent ensures robust performance, even if dry, and its 60 μm particle size is suitable for viscous samples. This cartridge integrates seamlessly with vacuum manifolds and automated SPE instruments.
- Optimized polymeric sorbent for high selectivity and sensitivity in acidic compound extraction.
- Water-wettable sorbent ensures high retention and recoveries even when dry.
- 60 μm particle size recommended for viscous samples.
- Compatible with vacuum manifolds and automated SPE instruments.
- Provides stability across a 0-14 pH range.
- Removes phospholipids and lysophospholipids to reduce LC/MS/MS ion suppression.
Waters Corp Waters Oasis MCX Vac Cartridge, Mixed-Mode Polymeric, 1 cc, 30 mg, 30 μm
These 1 cc Oasis MCX cartridges feature a novel, mixed-mode polymeric sorbent, optimized for high selectivity and sensitivity in extracting basic compounds. Water-wettable for consistent performance, they simplify sample preparation and are ideal for vacuum manifolds and automated SPE instruments.
- High selectivity and sensitivity for basic compounds.
- Water-wettable design ensures consistent performance even if dry.
- Dual modes of retention: ion exchange and reversed-phase.
- Broad pH stability (0-14) allows flexible method development.
- Superior binding capacity vs. other SPE sorbents.
- Prevents analyte breakthrough or recovery loss.
- 1.0 meq/g sulfonic acid ion exchange capacity.
Waters Corp Vac Cartridge, Alumina B, 100 mg, 1 cc, 50-300 μm
These Alumina B Vac cartridges feature a highly active alumina with a basic surface chemistry, providing a polar surface for analyte retention and behaving as a Lewis acid. They are designed for use with vacuum manifolds and automated solid phase extraction instruments.
- Contains highly active grade of alumina with basic surface chemistry.
- Provides extremely polar surface for analyte retention.
- Behaves as a Lewis acid.
- Offers greater stability than unfunctionalized silica under high pH conditions.
- Functions as a low-capacity ion exchanger in aqueous media.
- Extracts phospholipids, steroids, and catecholamines.
- Used for isolating radioactive compounds as it is unaffected by high-energy radioactivity.
- Designed for use with vacuum manifolds and automated solid phase extraction instruments.
Waters Corp Waters Otto Cartridge Startup Kit, 1 cc, for 13 mm Tubes
This kit provides essential components for starting solid phase extraction (SPE) applications with Otto systems. It is designed for use with 13 mm collection tubes and includes cartridges, racks, and waste collection.
- Includes 24 flanged or flangeless 1 cc cartridges
- Features a 1 cc top rack
- Equipped with a 13 mm tube collection rack for 100 mm tubes
- Comes with a tube spacer for 75 mm tubes
- Includes waste collection components
Agilent Technologies GLYKOCLEAN S-PLUS CARTRIDGES
GlykoClean S-plus Cartridges [GC210]For clean-up of fluorescently labeled glycans. Mini cartridge comparable to our popular GlycoClean S Cartridge (product code GKI-4726) for use on the GlykoScreen Glycan Clean-up Station (product code GC100) vacuum manifold, 96-well array format.
Waters Corp Waters Sep-Pak Classic C18 Cartridge, 360 mg, 50/PK
Waters Sep-Pak Classic C18 Cartridge, 360 mg, 50/PK
Waters Corporation Vac Cartridge, WCX, 150 mg Sorbent, 30 μm
This vac cartridge contains a polymeric reversed-phase, weak ion exchange mixed-mode sorbent, ideal for highly selective sample preparation of strong basic compounds and quaternary amines. It is water wettable, ensuring high retention and recoveries even if the sorbent runs dry, and is designed for use with vacuum manifolds and automated SPE instruments.
- Leverages WCX (Weak Cation Exchange) SPE sorbent.
- Optimized for fast and simple delivery.
- Ion exchange capacity of 0.75 meq/g.
- Particle size of 30 μm.
- Mass spectrometry compatible.
- Provides a wide and stable pH range (0 to 14).
- Ultra-clean to ensure no contamination interferes with analysis or sample preparation.